cutting hardness

New Technology of Cutting High Hardness Roller Sheet in Fine Cokes Roller-type Crusher

焦粉四辊破碎机高硬度辊皮切削的新工艺

In the practical application of the equipment, fracture splitting defects such as drop clinker and slag inclusion can be reduced and the laser cutting parameters and hardness of lower limit can be improved.

裂解槽激光加工自动化设备在实际应用中，能够减少爆口、夹渣等裂解缺陷，并可以通过改变激光切割参数，改善硬度处于裂解工艺要求下限的连杆的裂解质量。

This material possesses high strength and toughness, its wear resistance being similar to that of ceramics. As a result, these tools show good performance in cutting high hardness materials.

这种刀具材料的耐磨性与陶瓷材料相近，并具有较高的强度和韧性，在切削高硬度材料时表现出良好的性能。

The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.

切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。

Besides, the experimental result shows that it is possible to machine the middle hardness surface gears on an ordinary bobbing machine under the rational cutting conditions.

测试结果表明：在合理的削切条件下，在普通滚齿机上实体滚切中硬齿面齿轮是完全可能的。

Tempered martensite was gradually generated as the cutting temperature increased, which is the main cause of the decrease in the hardness.

随着加工温度升高，工件表面逐渐产生回火马氏体，这是造成工件表面硬度下降的主要原因。

In addition, cut hardness decreases, heat affected zone width reduces and the size of grain gets smaller during underwater cutting.

超声频脉冲的作用还使得水中切割时切口硬度降低，热影响区宽度降低、晶粒变细小。

By cutting different hardness concrete experiment, the cutting characteristics of the special saw with holes or different width segment have been studied.

对多孔锯片及非等间距锯片进行了锯切三种不同硬度的混凝土的实验研究。

All metal cutting tools begin to lose hardness when heated to sufficiently high temperatures.

达到一定高温高时,所有的金属切削刀具便开始软化.

Wear resistance improves as cutting tool hardness increases.

削刃口耐磨，易磨损。削硬越，耐磨性越。

A Study of Martensitic Stainless Steel with Free-Cutting and High Hardness

易切削高硬度马氏体不锈钢研究